汪玉春

（详细介绍附后）

附：年会主题报告嘉宾介绍

1.齐二石

齐二石，中国机械工程学会常务理事，中国机械工程学会工业工程分会副主任委员，中国工业工程突出贡献专家，教育部高等学校工业工程类专业教学指导委员会主任委员，天津大学教授、博士生导师、天津大学校学术委员会副主任，第五届国家863/CIMS 专家，天津市先进制造及自动化技术专家委员会委员。主要研究方向：管理科学与工程、系统工程、工业工程、物流工程。

2.Prof.Chen-Fu Chien

Taiwan Tsing Hua Chair Professor (台湾清华大学)

Dr. Chenfu Chien is Tsinghua chair professor of department of Industrial Engineering and Engineering Management in Taiwan Tsing Hua University (NTHU), Taiwan. He is a member of IEEE, IIE, CIIE, CIDS, and CSMOT and is a Board Member of CIIE and CIDS. Dr. Chien has served as the Steering Committee of the Industrial Engineering and Management Program in Taiwan Science Council since 2002. He was a guest editor for IEEE Transactions on Automation Science and Engineering, International Journal of Business, International Journal of Production Economics, International Journal of Service Technology andM anagement, Journal of Intelligent Manufacturing, and OR Spectrum. He is currently Editorial Board Member of Computers and Industrial Engineering, Associate Editor for IEEE Transactions on Automation Science and Engineering, Area Editor for Flexible Services and Manufacturing Journal and Advisory Board of OR Spectrum. He is also on the editorial board for International Journal of Operational Research (UK), Journal of the Chinese Institute of Industrial Engineers (EI/TSSCI), Sun Yat-Sen Management Review (TSSCI), Journal of Management and Systems (TSSCI), and Journal of Quality (EI).

3.Prof.Russell Thompson

The University of Melbourne, Australia (澳大利亚墨尔本大学)

Russell Thompson is an Associate Professor in Transport Engineering in the Department of Infrastructure Engineering at the University of Melbourne in Australia. His research areas are urban freight, resilient transport systems and intelligent transport systems.

He has over 15 years of experience in urban freight research. Russell has been involved in a number of local and international studies relating to urban freight, including the European Union’s Best Urban Freight Solutions (BESTUFS) project and the OECD report on urban distribution.

Russell was a founding Director and has been the Vice President of the Institute for City Logistics based in Kyoto since 1999. He isalso a Team Leader of the Volvo Research and Education Foundation’s Centre of Excellence in Sustainable Urban Freight Systems. He has been involved inseveral studies that have estimated the economic, environmental and safety benefits of performance based standards. Russell has published over 10 booksand 50 refereed publications in the field of urban freight. He is currently involved in a number of projects involving autonomous freight vehicles.

Russell leads the Transport research program inthe Centre of Disaster Management and Public Safety (CDMPS) and coordinatesprojects relating to the disruption and recovery of traffic networks, traffic guidance systems and humanitarian logistics.

4.Prof.SOEMON TAKAKUWA

Chuo University and Nagoya University (日本中央大学和名古屋大学)

SOEMON TAKAKUWA is a Professor at Chuo University and a Professor Emeritus at Nagoya University in Japan. He received a Ph.D. in industrial engineering from Pennsylvania State University. He also holds a Doctorate of Economics from Nagoya University and holds of a P.E. in industrial engineering. He is a corresponding member of the International Academy of Engineering in Russia. He received the 2006-Medal of DAAAM (Danube Adria Association for Automation &Manufacturing International and other distinguished awards. His research interests include the optimization of manufacturing and logistics systems, management information systems and simulation analysis of these systems in the context of hospitals. He has prepared the Japanese editions of Introduction to Simulation using SIMAN, Simulation with ARENA, and Simio and Simulation: Modeling, Analysis, Applications. 

5.Fei Tao

Beihang University (北京航天航空大学)

Fei Tao received the B.S. and Ph.D. degree in Mechanical Engineering from Wuhan University of Technology, Wuhan, China, in 2003 and 2008, respectively. He was a Visiting Scholar/Postdoctoral at the University of Michigan-Dearborn from 2007 to 2009. He is currently a Professor and Vice Dean at the School of Automation Science and Electrical Engineering, Beihang University, Beijing, China. His current research interests include service-oriented smart manufacturing, manufacturing service management and optimization, digital twin driven product design/manufacturing/service, sustainable manufacturing and cloud manufacturing. He has authored 4 monographs and over 100 journal papers in these fields, which obtained over 7,000 citations in Google Scholar and 2,000 citations in Web of Science.Dr. Tao is currently the Editor of International Journal of Service and Computing-oriented Manufacturing (IJSCOM).

6.汪玉春

汪玉春，中国机械工程学会工业工程专家、原一汽轿车股份有限公司党委书记，高级职业经理人，高级经济师。先后在一汽轿车厂、一汽二轿厂、一汽轿车公司、一汽大众公司任职，从事工业工程领域工作近16年。通过学习和消化吸收TPS的先进管理理念，形成建立具有一汽轿车自己特色的生产管理体系即HPS，从而达到提升公司研发、设计、制造和营销自主能力的目的。通过自主研发项目，体系能力得到大幅提升，达到了“出机制、出流程、出标准、出思想、出人才”的目的。